Startseite
poe injector 48v
DC/DC Gigabit PoE Injector with 40-60V DC Input Voltage and 48V

DC/DC Gigabit PoE Injector with 40-60V DC Input Voltage and 48V

5 (697) · € 22.50 · Auf Lager

Detailed information of DC/DC Gigabit PoE Injector with 40-60V DC Input Voltage and 48V/0.5A Maximum Load, MIT-69G-4848BNNN offered by MSTronic Co. Ltd..

PoE Adapter: Industrial w/ redundancy. Passive Power Over Ethernet. DC Jack 2.1mm

Tycon Systems 11-60VDC IN. 56V 90W 802.3bt PoE OUT. DC to DC Converter and

PoE World Gigabit 24V 48V Passive Injector Black Ethernet Segregator PoE Injector 2.1x5.5DC RJ-45 connector for VOIP Phones

The%20TP-DCDC-1248G%20offered%20by%20Tycon%20Power%20is%20a%20low%20cost%20and%20high%20efficiency%20solution%20for%20those%20requiring%20Passive%20Po

Tycon 9-36VDC IN. 48V 20W Gigabit Passive PoE OUT. DC to DC Converter and PoE Injector

The TP-DCDC-4824G offered by Tycon Power is a low cost and high efficiency solution for those requiring Passive Power over Ethernet from a 48VDC voltage source like a battery system or vehicle. They have an integrated POE injector to apply the power and data output to the CAT5 Ethernet cable. The output voltage is regulated and protected. They have a common (-) and two (+) inputs for connecting 2 power sources, such as a primary with a backup power source.

Tycon Systems 36-72VDC in 24V 24W Passive PoE Out DC to DC Converter and Gigabit Passive PoE Injector TP-DCDC-4824G

DC/DC Gigabit PoE Injector with 40-60V DC Input Voltage and 0.35A Maximum Load, MIT-98G-4848BDNM - MSTronic Co. Ltd.

DC/DC, 802.3at Gigabit PoE Injector with 40 to 60V DC Input and 56V/0.625A Output, -40C~+40C, MIT-70G-4856BDNN - MSTronic Co. Ltd.

Shop StarTech.com Industrial Gigabit PoE Splitter, 90W High Speed Power over Ethernet PoE+++ Splitter, 12-48V DC Splitter 802.3bt, LAN/RJ45 Ultra PoE to DC Adapter, -40C to +75C, High Power - Gigabit

Use 12-60 Volt DC Power to Deliver 50 Volt IEEE 802.3at PoE+ Use the GAT-50v30w with any unregulated DC power source from 12 volts up to 60 volts to deliver a regulated 50-volt Active PoE+ up to 30 watts of power for WiFi - Cameras - or PoE Devices.

DC Powered PoE+ Gigabit Inline Injector That Converts 12-60V Volts to 50 Volt IEEE 802.3at PoE+

Output 1 is an 802.3af Mode B PoE output with Data and PoE. Output 2 is a 48V Passive PoE Mode B output with PoE only, no data. The splitter is designed to supply power and data to one device and power only to the second device. It is Gigabit compatible providing speeds to 1000MB.