PoE Injector, PoE+ injector, PoE power injector

4.6 (341) · € 37.99 · Auf Lager

The Perle PINJ30 is a single port PoE mid-span injector fully compliant to PoE+ (30W of power) and PoE (15.4W of power)
PINJ130 - PoE Power Injector: One port 10/100/1000Base-T , 30 watts, IEEE 802.3at compliant. PoE+ and PoE compatible. EU AC Power cord included

Learn more about the 802.3at PoE Injector like the technical specifications or if you need to speak to someone a link to contact sales

802.3at PoE Injector

10 GigE PoE+ 802.3at PoE Injector

The Fastcabling 30W 802.3at PoE+ Midspan Injector can add power to the Ethernet cable and transmit data to front-end IP devices so that the PoE system can be set up. Both power and data are running over a signal Ethernet cable which makes the installation convenient and cost-saving. There is no need to buy an expensive PoE switch or install electrical wiring and outlets in hard-to-reach locations.

30W PoE+ Midspan Injector 10G/5G/2.5G/1G, 55V, 100-240VAC, for IEEE 802.11ax PoE APS, WiFi 6, Plug & Play, Wall/Desktop Mount, 1 Port, Upgrade Non-PoE

The Intellinet Gigabit High-Power PoE+ Injector provides up to 60 W using all four pairs of twisted-pair Cat5 or Cat6 cabling to support IoT applications such as lighting, sensors and building automation. Key.

Intellinet 561235 Gigabit Ultra PoE+ Injector

EDIMAX Technology GP-101IT IEEE 802.3at Gigabit PoE+ GP-101IT

GAT-8-56v120w 802.3at Gigabit PoE+ Injector with 56 Volt 120 Watt

60W PoE+ Power Injector

Get power and data over your existing LAN cable. The Intellinet Network Solutions Industrial Gigabit High-Power connects your IEEE 802.3af/at-compliant products to a non-PoE LAN switch port. The injector can be used to connect a wireless access point, IP phone, network camera or any IEEE 802.3af/at-powered device (PD) to a switch. The device has an output power rating of up to 30 watts, enough for most of the common PoE devices.

Intellinet 561365 Industrial Gigabit High-Power PoE+ Injector

The Intellinet Network Solutions Gigabit High-Power PoE+ Injector lets you connect your IEEE 802.3af/at-compliant product to a non-PoE LAN switch port. The PoE Injector can power and supply a network connection to a wireless access point, IP phone, network camera or any IEEE 802.3af/at-powered PD. This injector has an output power rating up to 30 watts. That's enough for even power-hungry PoE devices.