PoE Adapters for Non-PoE IP Cameras

4.9 (794) · € 6.50 · Auf Lager

These small adapters will allow you to turn your IP cameras that are not PoE in to PoE IP cameras so you can send data/power over a single network cable. Simply connect the adapters to each end of the cable, and to your IP security camera. On the power en
CCTV Camera World is a direct supplier of security cameras and IP PoE camera systems backed by expert technical support. Call (877) 522-8836 today.
These small adapters will allow you to turn your IP cameras that are not PoE in to PoE IP cameras so you can send data/power over a single network cable. Simply connect the adapters to each end of the cable, and to your IP security camera. On the power end, connect a 12VDC power adapter to the female power jack, and the network connector to your router or switch. We recommend you don't use a PoE switch with this setup. You should be using a 12V DC 2amp Power adapter with these. The current output on the other end, depends on the gauge and whether your network wire is full copper or CCA. Here's a list of cameras from CCTV Camera World that you will need these connectors with: 5 Megapixel IP Camera, 300ft IR Night Vision Onvif, 5MPBC6 5 Megapixel IP Camera 300ft IR Night Vision Onvif Compatible, 5MPBC8 Here's a diagram of how it all works: Don't forget to watch the video below to learn more about how you can use these adapters even with PTZ cameras. What's Included? (1 Pair) Passive PoE Power Adapters Please note the color of the adaptor varies with the stock we have. They may be white or black in color depending on what we have in stock.

TL-POE150S, PoE Injector

Gigabit PoE+ Injector, 30W POE Power Adapter, IEEE802.3af & 802.3at Compliant,100/1000M Fit for Ubiquiti U-POE-at, U-POE-af, POE-48-24W-G, TP-Link TL-POE160S, TRENnet TPE-115GI, Tenda PoE30G-AT, : Electronics

How To Add POE (Power Over Ethernet) for Non POE Cameras – WirelesSHack

ANVISION 2-Pack Active 48V to 12V Waterproof PoE Splitter Adapter, IEE

48V POE Active Splitter output 12V waterproof suitable for Non POE IP cameras and wireless AP 10/100mbps POE connector Cable Kits

Buy Jenix POE Splitter for non POE IP Camera , Non POE Switch 48V to 12V DC and Data Power Over Ethernet Split in Power 12V 2Amp and Ethernet Data 802.3af Active

Support Non-Poe Duplex Gigabit Speeds Network Distances up to 100M (328 ft) Black – OOSSXX

PROCET PoE Injector 48V 30W, IEEE802.3at Gigabit Power Over Ethernet PoE Adapter, Single Port PoE Power Injector for IP Camera Wireless/Wireless Access Point Long Range/IP Phones, EN30GT