Notice - This connector is designed for Rough Cut lumber NOT nominal lumber (most common). This will only fit a post that measures an actual 4x4". If you have a nominal post measuring 3-1/2x3-1/2" you will need an ABU44Z Post base The Strong-Tie ABU series of adjustable post bases provide a 1" standoff for the post and

Notice - This connector is designed for Rough Cut lumber NOT nominal lumber (most common). This will only fit a post that measures an actual 4x4. If you have a nominal post measuring 3-1/2x3-1/2 you will need an ABU44Z Post base

The Strong-Tie ABU series of adjustable post bases provide a 1 standoff for the post and are slotted for adjustability. The R series of post bases are designed exclusively for use with rough cut lumber. The ABU44RZ adjustable post base is approved to be installed with the specified nails, Strong-Drive SD connector screws or specified machine bolts. The Strong-Tie ABU44RZ post base features a G185 ZMAX galvanized finish for added corrosion resistance and requires the use of hot-dip galvanized fasteners which meet the specifications of ASTM A153.

Features:

• The slot in the base enables flexible positioning around the anchor bolt, making precise post placement easier
• The 1 standoff helps prevent rot at the end of the post and meets code requirements for structural posts installed in basements or exposed to weather or water splash

Installation:

• Use all specified fasteners.
• Post bases do not provide adequate resistance to prevent members from rotating about the base and therefore are not recommended for non top-supported installations (such as fences or unbraced carports).
• Place the base, load transfer plate and nut on the anchor bolt. Loosely tighten the nut

ABU

• Place the standoff base and then the post in the ABU.
• Fasten using nails or Strong-Drive SD structural connector screws or bolts (ABU88, ABU1010 – SDS optional).

NOTE: The correct fasteners installed in the correct position must be used to achieve published load values

Looking for something different? See the rest of our Simpson Adjustable Post Bases.

California Residents: WARNING

Notice - This connector is designed for Rough Cut lumber NOT nominal lumber (most common). This will only fit a post that measures an actual 4x4. If you have a nominal post measuring 3-1/2x3-1/2 you will need an ABU44Z Post base The Strong-Tie ABU series of adjustable post bases provide a 1 standoff for the post and are slotted for adjustability. The R series of post bases are designed exclusively for use with rough cut lumber. The ABU44RZ adjustable post base is approved to be installed with the specified nails, Strong-Drive SD connector screws or specified machine bolts. The Strong-Tie ABU44RZ post base features a G185 ZMAX galvanized finish for added corrosion resistance and requires the use of hot-dip galvanized fasteners which meet the specifications of ASTM A153. Features: The slot in the base enables flexible positioning around the anchor bolt, making precise post placement easier The 1 standoff helps prevent rot at the end of the post and meets code requirements for structural posts installed in basements or exposed to weather or water splash Installation: Use all specified fasteners. Post bases do not provide adequate resistance to prevent members from rotating about the base and therefore are not recommended for non top-supported installations (such as fences or unbraced carports). Place the base, load transfer plate and nut on the anchor bolt. Loosely tighten the nut ABU Place the standoff base and then the post in the ABU. Fasten using nails or Strong-Drive SD structural connector screws or bolts (ABU88, ABU1010 – SDS optional). NOTE: The correct fasteners installed in the correct position must be used to achieve published load valuesLooking for something different? See the rest of our Simpson Adjustable Post Bases.California Residents: WARNING

Simpson Strong Tie ABU44RZ Z-Max Adjustable 4 x 4 Rough Post Bases with corrosion protection

Simpson ABU44RZ Rough Cut 4x4 Adjustable Post Base - Zmax Finish – Fasteners Plus

Simpson Strong-Tie ABA ZMAX Galvanized Adjustable Standoff Post Base for 4x4 Nominal Lumber ABA44Z - The Home Depot

Simpson Strong-Tie ABU66RZ - ZMAX Galvanized Adjustable Standoff Post Base for 6x6 Rough Product Details The ABU is designed to attach wooden posts to existing concrete in high capacity applications. The built-in 1 inch standoff of this adjustable post base helps to prevent rot at the end of the post. The ABU has a slotted anchor hole in the base for adjustability and attaches to the post with nails Strong-Drive SD Connector screws or bolts.

Simpson Strong-Tie ABU66RZ Zmax Adjustable Rough 6 x 6 Post Base

Simpson Strong-Tie BC40R Half Base Rough

Simpson Strong-Tie Post Base Zmax ABA46Z

The ABA is designed to attach wooden posts to existing concrete. The built-in 1 standoff of this adjustable post base helps to prevent rot at the end of the post. The ABA has a slotted anchor hole in the base for adjustability and attaches to the post with nails or Strong-Drive SD Connector screws. This versatile post base makes a cost-effective option for securing a post to the foundation.

Simpson Strong-Tie Aba 4x4 Rough Zmax Galvanized Adjustable Standoff Post Base | ABA44RZ

Adjustable Post Base Simpson

Simpson Strong-Tie ABU44RZ Adjustable Post Base Rough

Simpson Strong-Tie ABU44RZ Adjustable Post Base Rough