Rule Bilgenpumpe 1100 12V 27DA

4.5 (535) · € 19.99 · Auf Lager

Rule 27DA - Rule 1100 GPH Bilge Pump 12V

RULE BILGE PUMP 1100 GPH 12V #27DA – Harken Fosters

Rigorous engineering and testing helped generate the new series of bilge pumps. Our pumps are tested to the highest standard, achieving rated performance at 12V vs. 13.6V, resulting in higher flow with better efficiency for the toughest applications. Our new designs include: Higher Flow optimized impeller to provide greater flow at the same amperage. Built-in Thermal Cut-Off (TCO) provides added protection for pump and vessel.

Rule 27DA 1100GPH Standard Bilge Pump - 12V

In the next generation sensing bilge pumps, the 1100 gph S series pump works on the principle of impeller resistance. The pump will turn on every 2-1/2 minutes for about one second to sense for water. If water is present, the pump will sense resistance and continue to run until all water is removed. After that, it will resume checking for water every 2-1/2 minutes.

Rule 27SA 1100GPH Electronic Sensing Bilge Pump - 12V

Rule Side Mount Bracket f/Newer 360-1100 GPH Rule Pumps [66A]

A Dry Bilge is a clean odorless bilge. Rule now offers the best most effective method of removing almost all of the water in your bilge leaving 1/8 or less keeping your bilge fresh clean and dry. Features. Drains the bilge almost dry. Filter-free design. Self-priming to 9.5' (3 m). Able to run dry without damaging the pump. Up to 4.0 GPM (15 LPM) flow. Back flow prevention. Connections for 3/4 (19 mm) hose barbs. Rotating pump head and ports. Compact and simple design.